(Notice for Virus Infected Computer)
If you notice your system automatically countdown (say RPC is terminated.....message) and shutdown / reboot your PC
in 30sec, then your computer has been infected with m.blast worm virus. or Sasser virus.

To remove these virus, please check AntiVirus website. for example, www.sarc.com (Symantec Website) to get remove tool
Also, please turn on your Firewall immediately


How to Enable Firewall for DMRS system (WindowsXP Only)?
1. Unplug Network Cable first.
(from the back of your computer)

 
 
2. Shutdown Your PC for 30sec, then
Turn On your PC
with No network cable connect.
 
 
3. Go to Start Menu, and open Control Panel.

If you are using classic start menu, go
Start -> Settings -> Control Panel

 

Double click icon on Network Connections

4. You should see this icon, if you have a network card.

If you don't have network card, you don't need to see this page at all.
5. Right Click and choose Properties (left click)
6. You should see properties page on the right.

Click Advanced Tab

7. Check square box , Protect......
8. This instruction (8~19) is for DMRS system
Firewall Port# opening:

Please follow these steps:

Click Settings at the bottom

9. click Web Server (HTTP) to highlight the line.

Choose Edit at the bottom

 

10. Then, it should popup this picture.

Remember:
Write down the second line information on the paper,
this is your computer name.
or please do Ctrl+C to copy the info.

You need this information later.....

Click Ok to exit

11. Now, we have more services need to add.

RemoteView,
Web1,
Web2...

Click Add

12 After Click add button, you should see this picture.

Type RemoteView in the first line

Type your computer name in the second line. (see 10)
or use Ctrl+V to paste it back. (see 10)

Type 3550 in the 3rd line.
Type 3550 in the 4th line.

Click OK when finish.

13 Same thing, Click Add button.

After Click add button, you should see this picture.

Type Web1 in the first line

Type your computer name in the second line. (see 10)

Type 4550 in the 3rd line.
Type 4550 in the 4th line.

Click OK when finish.


 
14 Same thing, Click Add button.

After Click add button, you should see this picture.

Type Web2 in the first line

Type your computer name in the second line. (see 10)

Type 5550 in the 3rd line.
Type 5550 in the 4th line.

Click OK when finish.

15 Now, it is completed your settings.

Click OK when finish.

If you need to use other services, or other servers. You need to add in here, too.


For example,

Web Server use port 80
Webcam1 use port 4550.
Webcam2 use port 5550.
WebcamAudio use port 6550

RemoteView Server use port 3550.

RPB server using port 5066.

Connect to Center use port 20001

VNC use port 5900

16 Click OK to finish Enable Firewall.
17 When Firewall is enabled, you should see a little orange color Lock Icon on the top right corner.
18. Plug-in back your Network Cable  
19. Reboot PC.  
     
HOME PAGE      EMAIL
 
Home Spy
 

Copyright 1996-2015