How to connect POS components

 
 
Pole-display
 
1.
All dip-switches are off except #6
2.
This connector connects the pole display to the PC.

The blue dipswitch on the left will help to co-ordinate the position

3.
One end of the pole display go to a 9-pin connector to PC.

There are 2 9-pin connectors. We are talking about the one above the printer connector.

The black small plug above the connector is the power cord.

 
Star receipt printer
 
1.
 
2.
Underneath the Star Printer,
Left is printer cable
right is telephone-shape cable to cashier drawer
3.
Other end of the telephone-shape cable to cashier drawer.

Cashier drawer must match the printer.

4.
Position the roll-paper as illustration on the left
5.
Insert the dongle to the printer port of the PC.

Then connect the printer cable from the Star printer to the back of dongle.

dongle is a protection to the QS2000 software.
If we lost the dongle, QS2000 will not work and have to buy another one!!

 
Cashier Register PC
 
 
 
1.
Mouse on top (green)

keyboard on bottom (purpose)

2.
Connect the video cable of the monitor to the 25-pin connector
3.
If you have network, connect the network cable to RJ45 connector.

 

HOME PAGE      EMAIL
 
Home Spy
 
 

Copyright © 1996-2013